installing wet kit to fuel rail - Nitrous Oxide Forum Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
installing wet kit to fuel rail
Tuesday, March 03, 2009 9:34 AM
I want to install a wet kit on my Ion. Some fuel rails have a place to insert an extra fuel line for a wet system. Mine does not have that. It's the rounded looking one. Can I "t" it off from the fuel line before the injectors? How is the best way to install it with out hurting the FI system?

Re: installing wet kit to fuel rail
Tuesday, March 03, 2009 7:12 PM
Q. How easy is it to install a basic wet nitrous system?
A. The NX "Stage One" EFI System is very straightforward. It requires no engine disassembly, no fuel system modifications or timing retards. Simply install the "Shark" nozzle in the intake tract approximately 2-6 inches in front of the throttle body and connect the fuel solenoid to the high-pressure side of the injection rail and your ready to go.

This is taken from here http://www.j-body.org/forums/read.php?f=39&i=9545&t=9545. It's not an Ion, but the basics are the same.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search