does anyone have a pic of upper and lower engine mounts on a Ecotec? If so can you please post them up?....I know where to place the upper engine mount but need help with the lower one....Thanks
The lower motor mount is almost directly below
the upper lower mount on the bottom of the engine.
It is basically a black bar looking sorta like a dogbone
connecting from your enging to the frame of your car.
the lwer mount is real easy is between the k-member and the motor and its a deffinent plus to replace both cause i have them and the trans mounts and have hardly any wheel hop.
12.7@110MPH with 10PSI.
Here is the lower mount;
Here is the upper mount (in red);
_______________________
Project L61 - Slowly but Surely
16.2@82.54 Auto w/ Intake and Exhaust
14.9@89.79 w/ a Blower
What do you have to torque the bolts to for the engine mounts? Both Upper and Lower.
74 lb ft + 90 degrees for the lower, sorry I don't have for the Upper.
_______________________
Project L61 - Slowly but Surely
16.2@82.54 Auto w/ Intake and Exhaust
14.9@89.79 w/ a Blower
