I'm building a sand rail with a 2.2 in it. But there has been se confusion as to what fuel pump I need. I been told I need an inline with atleast 50 psi is this correct? Also should I run a 5/16 or 3/4 line for the fuel and return lines. Please someone help!
Boy, this place is dead. I assume you must have figured it out by now, but with DI, I think you'll need a LOT more than 50 PSI. I think the new Corvette engine is using something like 2700 PSI!
ha..dead...you got that right.
they are only Direct injecting the 2.0 and 2.4 eco's.
can remember which ones are returnless fuel systems but 3/4 is way to big...5/16 is normal.
